Skip to content

RCPlanet

O.S. ENGINES IL300 INLINE RING 80P CARB OSM36310

, Mixture Control Valve Setting:, Factory set, turn 1/12 turn (30°) clockwise to lean mixture or 1/12 turn (30°), counter-clockwise to richen mixture, Needle Valve Adjustment:, After engine is primed, approximately ¼ turn Open from fully Closed, Displacement:, 0.765 cu in x 4 (12.5cc x 4), Bore:, 1.02" (25.8mm), Stroke:, .94" (24mm), Practical RPM:, 1,800-8,000, Weight:, 82oz (2,350g), Distance between Mounting Holes Same Side:, 3.1" (78.7mm), Distance between Mounting Holes Opposite Side:, 2.8" (71mm), Distance from rear of Engine Mount to Carburetor:, 4.4" (111.8mm), Distance from rear of Engine Mount to Prop Hub:, 9.2" (234.3mm), Distance/rear of Engine Mount to Outer Mounting Holes:, 5.2" (133mm), Distance between Cylinder Centers:, 1.6" (40mm), Height from Crankshaft Center to top of Engine:, 4.6" (116.8mm), Height/Crankshaft Center to Upper Engine Mount Hole:, 2" (50.8mm), Height/Crankshaft Center to Lower Engine Mount Hole:, 1.6" (40.6mm), Width between Engine Mount Holes:, 3" (76.2mm), Height between Engine Mount Holes:, 3.5" (89mm), ,

O.S. Engine Max IL-300 Dia-Star 4-Cylinder, 4-Stroke Inline Limited Edition ...

RCPlanet

O.S. ENGINES FT160 TWIN RING OSM36108

, Construction:, Aluminum and Aluminum alloys, Displacement:, 13.26cc (x2) or .809 cu in (x2), Bore:, 27.7mm (1.09"), Stroke:, 22.0mm (.866"), Power Output:, 2.0 BHP at 10,000 RPM, Weight:, 1100g (38.8oz), Practical RPM Range:, 2,000 - 10,000 RPM, Length:, 120mm (4.72") from backplate to front of the drive washer, Width:, 196mm (7.72"), Height:, 80mm (3.15"), Crankshaft Thread Size:, 5/16-24, Suggested Props:, 15x8, 16x6, 18x6, 18x7, 18x8, 20x6, Needle Settings, High Speed:, 3.5 turns out from fully closed, Mixture Control (low speed):, Flush with carb body, then 2 turns in, ,

O.S FT-160 twin-cylinder 4-stroke engine has 3-crankshaft ball bearings. 2-Camshaft ...

RCPlanet

O.S. ENGINES FS200S-P RING #80R CARB F6010 MUFFLER OSM35960

, Displacement:, 1.98 cu in (32.4cc), Bore:, 1.50" (38.0mm), Stroke:, 1.13" (28.6mm), Practical RPM:, 1,800 - 10,000, Output:, 3.0 PS, 2.96 HP/9000 RPM, Weight:, 30.9oz (876g) without muffler, Weight:, 34.9oz (992g) with muffler, Crankshaft Thread Size:, 5/16-24, Break-in Carburetor Settings, Needle Valve:, 2.5 - 3 turns open from fully closed, Idle Mixture:, Slightly rich (45-60°) from highest RPM setting, Mixture Control Valve:, Rotate until slotted head is flush with carb body, then screw in 1-1/2 half turns, Distance Between Mounting Holes Same Side:, 0.98" (25mm), Distance Between Mounting Holes Opposite Side:, 2.3" (58mm), Height from Crankcase Bottom to Rocker Cover:, 5.7" (144mm), Height from Crankshaft Center to Rocker Cover:, 4.7" (119mm), Height from Crankshaft Center to Muffler Center:, 3.2" (82mm), Distance from Crankcase Center to Prop Hub:, 0.27" (77mm), Width at Mounting Tabs:, 2.6" (67mm), Width of Crankcase Below Mounting Tabs:, 1.9" (48mm), Width of Cylinder Head:, 2.2" (58mm), Distance from Carburetor to end of Crankshaft:, 7" (179mm), Distance from Carburetor to Crankcase Center:, 2.5" (65mm), Distance from Carburetor to Prop Hub:, 5.6" (142mm), ,

O.S. engine is ideal for big scale and sport aircraft ...

RCPlanet

OFNA JLR SEDAN STARTER BOX OFN10260

, Length:, 9.8" (248mm), Width:, 5" (128mm), Height:, 3.1" (80mm) without post, Weight:, 1.8lbs (820g) without batteries, ,

Ofna starter box is lightweight and compact, easy to pack ...

RCPlanet

OFNA JL-10 1/10 GT SEDAN OFN34720

, ,

Ofna JL10e electric 1/10 sedan is a pre assembled rolling ...

RCPlanet

O.S. ENGINES REAR HOUSING GT60 OSM28601800

, ,

This is the O.S. Engines Rear Housing for the GT60 ...

RCPlanet

O.S. ENGINES PUMP RING 70N CARB OSM35540

, Bore:, 30.4mm (1.20"), Stroke:, 27.5mm (1.08"), Power Output:, 2.1 PS, 2.07 HP at 12,000 RPM, Practical RPM Range:, 2,000 - 12,000 RPM, Weight-Without Muffler:, 32.5oz (921g), Weight-With Muffler:, 35.3oz (1000g), Crankshaft Thread Size:, 5/16-24, Valve Clearance:, Between .04mm and .1mm (or between .0015" and .004", measured between the valve tip and rocker arm), Length:, 102mm (4.09") from backplate to the front of the drive washer, Width:, 47mm (1.85") width of engine neglecting the mounting flanges, Width:, 58mm (2.28") distance between the mounting hole centers, Height:, 139.5mm (5.49"), Suggested Prop(s):, 14x9, 14x10, 14x11, 15x8, 15x9, 15x10, 16x6,, Construction:, Aluminum and Aluminum alloys, Needle Settings, High Speed:, 1.5 turns out from fully closed, Low Speed:, 2.5 turns out from fully closed with the throttle fully closed, ,

O.S. Surpass series of 4-stroke model engines have specially developed ...

RCPlanet

OFNA 5-STAR WHEEL 17MM CHROME (4) OFN86049

, Width:, 1-1/2" (38mm), Diameter:, 3-1/4" (83mm), ,

Ofna wheels are constructed of chrome finish nylon with 17mm ...

RCPlanet

OFNA POWER TIRE GLUER BLACK OFN20001

, ,

This is the Ofna Black Power Tire Gluer. Features:Motorized turntable ...

RCPlanet

OFNA 1/8-1/10 ON/OFF-ROAD START BOX RTR OFN10247

, Length:, 15.25" (387mm), Width:, 4.75" (121mm), Height:, 3.25" (82mm), ,

1/10 1/8 Starter Box Stainless Fully Assembled and ready to ...

RCPlanet

OFNA BEARING 6X13MM OFN30631

, ,

Ofna package of black teflon sealed bearings these are made ...

RCPlanet

PARMA 4 OZ FASMASK LIQUID PAINT MASK PAR40281

, ,

Parma 4oz (118ml) Fasmask Liquid Paint Mask. #160; Use on ...

RCPlanet

PARMA 2 OZ. FASSKY PAR40012

, ,

Parma 2 oz. Fassky Blue Fuel-Proof, Water Based Formula For ...

RCPlanet

OFNA PINION ADAPTOR 5MM TO 3MM OFN30669

, ,

Ofna Racing package of two 5mm to 3mm pinion adapter ...

RCPlanet

O.S. ENGINES MAX 28XZ TRUGGY ENGINE OSM12830

, ,

This is the 2-stroke O.S. Max 28XZ Truggy Engine. ***Because ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby